Motorola MVME712M Installation And Use Manual page 31

Table 2-2. Cables and Connectors (Continued)
Modem J20
J21
VME J2
Interconnection Connector
VME P2
J2
SCSI J3
20-pin male IDC connector,
connects to a user-supplied
modem
6-pin polarized male
connector, supplies power
to the modem
64-pin male connector that
cables to J2 on the P2
adapter board
P2 Adapter Board
Description
96-pin female DIN 41612
connector that connects to
the chassis backplane
64-pin male connector that
cables to J2 on the
MVME712M
50-pin male IDC
connector that cables to J3
on the MVME712M
and/or to SCSI devices
Cables and Connectors
User-supplied 20-conductor
cable; usually supplied with
the modem
User-supplied 6-conductor
cable; usually supplied with
the modem
17.5-inch 64-conductor flat
ribbon cable, part number
30-W2514B02, furnished
with the MVME712M
(see Note below)
Cable
None needed
17.5-inch 64-conductor flat
ribbon cable, part number
30-W2514B02, furnished
with the MVME712M
(see Note below)
In the external-only SCSI
configuration labeled
"Configuration E" in Table
2-3 and Figure 2-18, use the
17.5-inch 50-conductor flat-
ribbon cable, part number
30-W2960B01A, furnished
with the MVME712M.
For other configurations, a
user-supplied 50-conductor
cable with SCSI
connector(s) as needed
2
2-15