Mira 415 Installation And User Manual page 27

16. Fix the circular mounting bracket to the shower control body using the two
M5 x 50mm screws used to retain the plastic building-in shroud.
noTe! The bracket has been designed with semi-circular knock outs which
may need to be relieved to accommodate the supply pipework under minimum
building-in depth conditions.
17. Push the concealing plate firmly over the circular mounting bracket until it
locates on the four clips.
18. This completes the installation of the mira 415B for installation into "solid,
dry-lined, stud partition or dry partition wall structures".
27