Mira 415 Installation And User Manual page 21

The building-in depth for the integral wall mounting bracket assembly is 58mm. The
building-in depth for the shower control (to the finished wall surface) is between 64
and 81mm. The building-in depth calculation must include the final thickness of
plaster and tiles. This dimension determines how much of the control knob will be
visible through the concealing plate when the installation is completed.
Wall Mounting
230
53
Bracket
134
43
110
146
12
214
38
92 A/F
67
Backplate
Ø101
A building-in shroud is supplied, which protects the shower control during plastering
and provides a reference for the building-in depth when chasing out the wall
surface.
Building-in Shroud
Raised Portion
Hot Inlet Port
Outlet Port
Shower Control
The built-in shower control has / " BSP male inlets and is supplied with 15mm
1
2
compression fittings. The outlet has a / " BSP tapping and supplied with a nipple
1
2
terminating in a / " BSP male or 15mm compression fitting.
1
2
21