3/2-Ways Magnetic Valve - BPW ECO Tronic EBS Operating And Installation Instructions

5 Installation and Operating Instructions
5.2 Air suspension
5.2.7 3/2-Ways magnetic valves
Bayonet connection
according
to DIN 72585
Fig. 137
Application
3/2-ways magnetic valves are used to control ventilation and
breathing procedures in pneumatic installations. These valves
are operated electrically and used in connection with the ECO
Tronic EBS, for example for controlling steering axle blocks or
for zero point adjustment in the case of air suspension valves
with a 2nd driving height in air suspension systems.
Installation instructions
Install vertically with the solenoid at the top. Installation site
must be protected against splash water. Mount using bolts and
nuts in holes in the body.
They can be mounted as a block, in which case replace the bolt
and seal ring with gasket (ordered separately).
Inspection
Check for operation and leaks.
78
70
27
M 12 x 1.5
1
2
12
3
24
Fig. 138 g. 138
Technical Data
Voltage:
Input power consump.:
Emergization time:
Nominal size:
Pressure range:
Type of protection:
Fitting position:
Operating temperature: - 40°C to + 85°C
39
24V
11W
100 %
2.5
0 - 10 bar
DIN 40050-IP67
Solenoid above