Painting - Protected Areas - BPW ECO Tronic EBS Operating And Installation Instructions

3 Chassis installation
3.1 Mounting of the Modulator

3.1.4 Painting - protected areas

Mounting face
When painting/coating all non-used electrical connections,
pneumatic and exhaust ports must be protected.
These are indicated by the shaded areas marked in Fig. 32.
Adequate protection should be used to avoid penetration of
the paint/coating.
All electrical ports have to be closed by connectors / blanking
plugs.
All pneumatic ports have to be closed by pipe fi ttings/blanking
plugs.
The exhaust ports and connector locking devices have to be
protected.
Underside
Painting recommendations:
Water based, baking for 1 hour at 100° C.
Indicates areas to be protected.
Front
Left side Right side
Fig. 32
26