3.2.8 Power (ISO 7638)
connections
Electric wiring power connection
From the slide lock housing (Fig. 52/1) (top horizontal connector
housing). Remove transit cover from „PWR-A" position.
Unlock the housing by sliding down lever (Fig. 52/2).
Make sure slider is in the unlock position (Fig. 52/3).
Ensure contact pins and seal are kept clean and free of any
contamination prior to installation.
„PWR-A" (ISO 7638) connection
Make sure that all connections (socket and plug) are clean and
dry before assembly (Fig. 53).
Identify orientation of the ISO 7638 blue coloured connector
(Fig. 54).
Ensure contact pins and seal are clean and free of any conta-
mination prior to installation.
In position „PWR-A", on the slide lock housing, insert connector
fully home. Then lock the housing.
3.2 Electrical wiring
1
3
Fig. 52
Fig. 53
Blue connector
Fig. 54
2
35