Sensor Connections/ Cabling - BPW ECO Tronic EBS Operating And Installation Instructions

3 Chassis installation
3.2 Electrical wiring
3.2.15 Sensor connections/
cabling
Sensor Connection
Sensor extension cable plug must be pushed fully into sensor
cable socket till they clip into place to prevent falling out with
axle vibration (Fig. 72).
Where possible use a clip and bracket to secure sensor cable
connection (Fig. 73).
Alternatively: Sensor cable connection to be positioned on axle
or between axle 'U' bolts and supported with cable ties within
50 mm of each end (Fig. 74).
42
Extension cable plug
Clip to 'click'
Fig. 72
Axle
Sensor cable
Axle
Fig. 73
Connection
Axle
Cable tie
'U' bolts
Fig. 74
Sensor cable socket
Connection
assembled
into clip and
bracket
Dust cover
Extension cable
Dirt shield
fi xing bolts
Cable tie
Axle
'U' bolts