General Installation Recommendations - Cabling - BPW ECO Tronic EBS Operating And Installation Instructions

3.2.4 General installation recom-
mendations - cabling
Anti-vibration support
Excess cable must not be allowed to hang free, but must be
attached to the chassis (Fig. 40/1) to prevent damage due to
vibration and abrasion.
Excess cable
Cable lengths less than 1 m to be coiled into loops of 100 mm
minimum and 150 mm maximum diameter (Fig. 40).
Excessive cable lengths which will not form a complete loop
may be left to hang in partial loops having a cable bend radius
of 50 mm minimum.
Cable lengths greater than 1 m to be coiled and then fl attened
in the centre (Fig. 41/2) to produce a 'dog bone' shape (Fig. 42).
The resulting loops at the end must have a minimum bend
radius of 50 mm. Cable ties are to be used to fi x the cable in
the fl attened loop shape.
More than one looped cable must not be looped together.
3.2 Electrical wiring
Fig. 40
Fig. 41
Ø min. 100 mm
Fig. 42
1
Ø max. 150 mm
Ø min. 100 mm
2
31