Related Manuals for FSR DV-MFSS-71
Summary of Contents for FSR DV-MFSS-71
- Page 1 4K 7x1 Multi-format Presentation Switcher DV-MFSS-71 Based on firmware revision 1.11 and FSR1.0.0.L 244 Bergen Blvd Woodland Park NJ 07424 973-785-4347 www.fsrinc.com 43091 LIT1557...
-
Page 3: Proprietary Information
PROPRIETARY INFORMATION All information in this manual is proprietary to and the property of FSR Inc. This publication is protected by the Federal Copyright Law, with all rights reserved. No part of this document may be reproduced, transcribed, or transmitted, in any form or by any means, without prior explicit written permission from FSR Inc. -
Page 4: Limited Warranty
FSR factory or Authorized Repair Stations. This warranty shall be cancelable by FSR at its sole discretion if the unit has been subjected to physical abuse or has been modified in any way without written authorization from FSR. FSR’s liability under this warranty is limited to repair or replacement of the defective unit. -
Page 5: Safety
SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. SAFETY ... - Page 6 ...
-
Page 7: Table Of Contents
TABLE OF CONTENTS PROPRIETARY INFORMATION ......................3 UNPACKING ............................3 LIMITED WARRANTY ..........................4 SAFETY ..............................5 DESCRIPTION ............................8 FEATURES ............................... 8 TYPICAL APPLICATION .......................... 9 AUDIO BLOCK DIAGRAM ........................9 DIMENSIONS ............................10 FRONT PANEL ............................11 VGA INPUT AUTO ADJUST BEHAVIOR: .................. -
Page 8: Description
Flex Control System to create a powerful and cost effective switching system. The DV-MFSS-71 features 4 HDMI, 1 Display Port, 1 DVI and 1 HD-15 video inputs. The HDMI inputs are HDCP compliant and accept resolutions up to 4K 2160p (3840x2160) @ 30Hz. The HD-15 input supports VGA, RGB, and YPbPr input up to 1920x1200 @ 60Hz. -
Page 9: Typical Application
TYPICAL APPLICATION AUDIO BLOCK DIAGRAM... -
Page 10: Dimensions
DIMENSIONS... -
Page 11: Front Panel
3 seconds. (See below) VGA INPUT AUTO ADJUST BEHAVIOR: The DV-MFSS-71 switcher will automatically adjust to new VGA sources when they are first connected. The process will take several seconds during which time the image will move around the screen until the optimal scaler settings are determined. Once a particular source is learned, the switcher will recognize it and readjustment will not be necessary. -
Page 12: Rear Panel
REAR PANEL Name Power input Digital audio output Analog audio output HDMI output Analog audio inputs HDMI inputs DisplayPort input DVI input VGA (RGB/YPbPr) input USB service port RS-232... -
Page 13: Operation
OPERATION Power ON and OFF (Standby) NOTE: To reset to factory default, press and hold Input Select 5 during the power up cycle until the front panel LEDs blink. Output format To select the video, press video and one of the inputs. To select the audio, press audio and one of the inputs. -
Page 14: Ir Remote Control
IR REMOTE CONTROL Name Power ON and OFF (Standby) Input Video and Audio select To select the video, press video and one of the inputs To select the audio, press audio and one of the inputs Volume up and down Mute and unmute Output resolution Auto (Display's native resolution) ... -
Page 15: On Screen Display (Osd)
ON SCREEN DISPLAY (OSD) HDMI2 Selected input and its input resolution 3840x2160@30Hz HDMI2 not connected Selected input state and DV-MFSS-71’s IP IP: 192.168.0.10 address VGA Auto Adjust VGA auto adjust Volume IP: 192.168.0.10 DV-MFSS-71’s IP address and port number Port: 23... -
Page 16: Ip Settings
IP SETTINGS There are two methods to obtain the IP address: 1. Obtain the IP address and port number via the information from the on-screen display (OSD). 2. Obtain the IP address and port number via the IP CONFIGURATION TOOL APPLICATION. -
Page 17: Ip Configuration Tool Application
To obtain the IP address and port number via the IP CONFIGURATION TOOL APPLICATION: Download the application "FSR_DV_71_74_Switcher.exe" file from the FSR Document Library at www.fsrinc.com. NOTE: Make sure the PC and DV-MFSS-71 are on the same network. Run the application on the PC to show Click Device Search, the following the main screen: device list is shown. - Page 18 DV-MFSS-71's information DV-MFSS-71’s IP information. DHCP is shown. is enabled by default. The static IP The DV-MFSS-71 settings can be address can be entered manually by returned to factory default by clicking disabling the DHCP via the pulldown menu.
- Page 19 Single commands may be sent to change the display capabilities of the unit by clicking on SEND COMMAND. Select either Ethernet or Serial radio button Select the appropriate COM port or Ethernet address. Then either select a predefined command or enter a user defined command. Click the SEND button to send the command:...
-
Page 20: Firmware Update (External Control Board)
1. Connect a Serial straight-through cable to the DV-MFSS-71's RS-232 port. If present, disconnect the Ethernet cable from the LAN port. 2. Turn on the DV-MFSS-71 and wait for it to finish booting up before proceeding to the next step. -
Page 21: Embedded Web Server
EMBEDDED WEB SERVER The DV-MFSS-71 can be controlled via a Web browser, which contains General, Advanced and Network settings. For more information about how to obtain the IP address, see the section on “IP SETTINGS”. For example, the obtained IP address is 192.168.0.115... -
Page 23: Control Ports
CONTROL PORTS To control the DV-MFSS-71 use the RS-232 or LAN port but not both at the same time. RS-232 SETTINGS RS-232 Settings Baud rate 9600 Data bits Parity None Stop bits Flow control None DB-9 Computer DV-MFSS-71 Ground Ground NOTE: For serial control, use a straight-through cable. -
Page 24: Rs-232 Serial And Ethernet Control Protocol
RS-232 SERIAL AND ETHERNET CONTROL PROTOCOL Settings Command Reply Aspect ratio ATM 0A WIN_RAT W 1 X 0A WIN_RAT W 1 X Ex: Input set to 16:9 ATM 0A WIN_RAT W 1 3 0A WIN_RAT W 1 3 Window aspect ratio request ATM 09 WIN_RAT R 1 09 WIN_RAT R X WIN_RAT 1 X X = (1 = Normal, 2 = Full, 3 = 16:9 or 4 = 4:3) - Page 25 Settings Command Reply X = Output (1 = Main output or 2 = Second output if applicable) Y = Input (1-7) EDID presets ATM 0B EDI_POR W X C Y 0B EDI_POR W X C Y Ex: Assign EDID preset 3 to input 1 ATM 0B EDI_POR W 1 C 3 0B EDI_POR W 1 C 3 X = input (1-7)
- Page 26 Settings Command Reply X = (0 = Mute OFF or 1 = Mute ON) Master audio mute ATM 09 AUD_MUT W X 09 AUD_MUT W X Ex: Master audio mute OFF ATM 09 AUD_MUT W 0 09 AUD_MUT W 0 Master audio mute request ATM 08 AUD_MUT R 08 AUD_MUT R AUD_MUT X...
- Page 27 Settings Command Reply Factory default Aspect ratio Audio delay Audio input configuration Normal Auto Audio OSD Audio selected DHCP HDCP input HDCP output HDMI audio mute Input EDID Master audio mute Output timing HDMI 1-4: 4Kx2K 30Hz 7.1Ch DisplayPort 5: 4Kx2K 60Hz Auto (Display's native resolution) DVI 6: 4Kx2K 30Hz VGA 7: 1920x1080 60Hz...
- Page 28 Settings Command Reply VGA auto adjust* ATM 08 VGA_AUT W 08 VGA_AUT W * The VGA auto adjust command can also be executed by pressing and holding the input 7 switch for 3 seconds. Video OSD ATM 09 VDO_OSD W X 09 VDO_OSD W X Ex: Video OSD ON ATM 09 VDO_OSD W 1...
-
Page 29: Firmware Update (Audio And Video Board)
1. Copy the MERGE.BIN update file to the root directory of a blank USB drive. 2. Connect the USB drive to the USB service port on the rear of the DV-MFSS-71. If present, disconnect the Serial and Ethernet cable from its respective port. -
Page 30: Specifications
SPECIFICATIONS Supported Formats HDMI video up to 3840x2160 30Hz and audio up to 7.1Ch DisplayPort up to 3840x2160 60Hz Input DVI up to 3840x2160 30Hz VGA (RGB/YPbPr) up to 1920x1200 60Hz HDMI video up to 3840x2160 30Hz and audio up to 7.1Ch Output Stereo analog audio Coax audio up to 7.1Ch...
Need help?
Do you have a question about the DV-MFSS-71 and is the answer not in the manual?
Questions and answers