Subscribe to Our Youtube Channel
Related Manuals for FSR RN-410 Series
Summary of Contents for FSR RN-410 Series
- Page 1 RN-410 SERIES AUDIO VIDEO SWITCHER Video Products Group INSTALLATION AND OPERATING MANUAL 43810 LIT1157...
-
Page 2: Compliance And Safety
COMPLIANCE AND SAFETY PROPRIETARY INFORMATION All information in this manual is proprietary to and the property of FSR Inc. This publication is protected by the Federal Copyright Law, with all rights reserved. No part of this document may be reproduced, transcribed, or transmitted, in any form or by any means, without prior explicit written permission from FSR Inc. -
Page 3: Table Of Contents
TABLE OF CONTENTS COMPLIANCE AND SAFETY ......................2 PROPRIETARY INFORMATION ...........................2 OPERATOR’S SAFETY SUMMARY ........................2 INTRODUCTION..........................4 RN-410 FRONT PANEL OPERATION..................... 4 SOURCE SELECTION ............................4 AUDIO LEVEL ADJUSTMENT ..........................4 AUDIO TRIM ADJUSTMENTS ..........................4 AUDIO CARD ABSENT ............................4 POWER UP / FAILURE OPERATION ........................5 DEFAULT FACTORY SETTINGS .........................5 TYPICAL APPLICATIONS ...................... -
Page 4: Introduction
INTRODUCTION This manual covers installation and operation the RN-410 family of audio video switchers. Most of the operat- ing principals are identical on all models. The unique characteristics such as connectors and pinouts are de- tailed on the application drawings. RN-410 FRONT PANEL OPERATION SOURCE SELECTION The source video and audio input are selected by pressing one of the 4 source buttons located on the left side... -
Page 5: Power Up / Failure Operation
Audio Mute lamp and button but they are effectively disabled and the lamps will not be lit. This provides a visual cue to user that the audio feature is absent on this model. The serial interface also provides indication of whether audio capability is present or not (see RN-410 Serial Protocol Manual). -
Page 6: Pinouts And Cabling
PINOUTS AND CABLING Cable Type: Standard 4 pin S-Video to two BNC male cable. Pinout Maximum Recommended Length: 35 ft Please see the RN-410 serial protocol manual included with the product for serial commands and other details on RS-232 control. RS-232 HARDWARE CONFIGURATION BAUD RATE 38400... - Page 7 RN-410 AUDIO INPUT CONNECTOR WIRING FROM A STEREO UNBALANCED SOURCE FROM A MONO UNBALANCED SOURCE SIGNAL FLOW SIGNAL FLOW SHIELD SHIELD INSTALL JUMPER OPTIONAL JUMPER INSTALL JUMPERS OPTIONAL JUMPER FROM A STEREO BALANCED SOURCE FROM A MONO BALANCED SOURCE SIGNAL FLOW SIGNAL FLOW SHIELD (2) SHIELD...
-
Page 8: Specifications
SPECIFICATIONS VIDEO INPUT MODEL RN-410YA RN-410CA RN-410P /PA RN-410SA SIGNAL TYPE COMPONENT COMPOSITE S-VIDEO CONNECTOR 4X3 RCA FEMALE 4 BNC FEMALE 4 HD-15 FEMALE 4-4 PIN FEMALE NUMBER/TYPE IMPEDANCE 75 OHM LEVEL 1 VOLT P/P VSWR <1.1@250MHz <1.3@100MHz <1.1@250MHz <1.3@100MHz ISOLATION >80dB@10MHz >80dB@10MHz... -
Page 9: Warranty And Return Info
This product is warranted against failures due to defective parts or faulty workmanship for a period of one year after delivery to the original owner. During this period, FSR will make any necessary repairs or replace the unit without charge for parts or labor. Shipping charges to the factory or repair station must be prepaid by the owner, return-shipping charges, via UPS / FedEx ground, will be paid by FSR.
Need help?
Do you have a question about the RN-410 Series and is the answer not in the manual?
Questions and answers