Related Manuals for FSR DV-HDSS-41-TX
Summary of Contents for FSR DV-HDSS-41-TX
-
Page 1: User Manual
User Manual DV-HDSS-41-TX 4x1 4K Scaling Presentation Switcher with Dual Outputs NOTE: See FSR LIT1628 API manual for serial commands. 43153 LIT1627... -
Page 2: Important Safety Instructions
Important Safety Instructions... -
Page 3: Table Of Contents
Table of Contents Important Safety Instructions Overview Features Package Contents Panel Description Dipswitch Setting Scaler Setting HDBaseT Cable Distances & Resolutions: Connection and Installation Switch and Lamp Connection Diagram Typical Functional Block Diagram Audio Hookup Dimensions Operation Input Select CEC Display Control Audio Controls API Control Specifications... -
Page 4: Features
Introduction Overview The FSR DV-HDSS-41-TX is an advanced four-input, multi-format converter, switcher, scaler and extender with built in 4K UHD scaling, in a compact 1RU half-rack enclosure. It offers two HDMI inputs, one DisplayPort input and one VGA input with Stereo Audio; Scaled HDMI with EDID controlled HDBaseT mirrored output to allow signal extension over CatX cable to reach a remote display, or additional HDBaseT signal management system. -
Page 5: Package Contents
HDMI out with 4K@30Hz scaler built in and de-embedded balanced stereo audio out HDBaseT mirrored out, supports PoH with PSE module to power remote FSR 100 Meter HDBaseT receiver HDMI out supports seamless and fast switching within 2-3 seconds, the last frame frozen without black ... -
Page 6: Panel Description
Panel Description Front Panel Name Description Connects to VGA source device VGA IN Stereo audio (embedded with VGA inputs) AUDIO IN Connects to DisplayPort source device DP IN Connects to HDMI source device. HDMI IN Selection button: press the button to select SOURCE Selection the desired input. -
Page 7: Back Panel
Back Panel Name Description LAN to/from HDBaseT Receiver ETHERNET Connects to a RS232 controller or RS232 RS232 Pass controllable device to pass through RS232 Through commands to HDBaseT Receiver Connects to a HDBaseT Receiver HDBT OUT Port Connects to HDMI display device HDMI OUT Port Connects to audio output device such as an AUDIO OUT... - Page 8 Name Description Connects to LEDs on the keypad to indicate the selected source No.1: LED for VGA input TALLY OUT No.2: LED for DP input Ports No.3: LED for HDMI1 input No.4: LED for HDMI2 input G: Connects to Ground (<100 mA) Connects to keypad to output CEC power commands DISPLAY...
-
Page 9: Dipswitch Setting
Dipswitch Setting 4 Pin DIP switch DIP Position Function UP: Audio out de-embedded from HDMI Audio output (Default) Switch 1 De-embedded DOWN: Reserved UP: Enable Auto-Switch with Manual Source Switch Override Control (Default) Switch 2 Mode DOWN: Manual Switch only UP: Enable Auto-CEC Control with Manual CEC Override Control (Default) Switch 3... -
Page 10: Scaler Setting
Scaler Setting HDMI scaler output support. Note Position Functions Scaler Set to Automatic Mode (default) Fixed 1024 x 768@60Hz as native video Fixed 1280 x 720@60Hz as native video Fixed 1280 x 800@60Hz as native video Fixed 1366 x 768@60Hz as native video Fixed 1600 x 1200@60Hz as native video Fixed 1920 x 1080@60Hz as native video Fixed 1920 x 1200@60Hz as native video... -
Page 11: Connection And Installation
100 mA and when active it should be short circuit protected. Switch between sources using the switch buttons in front panel, via CONTACT IN control, or RS232. Switcher can be directly connected to FSR HV-T6 Table Box following wiring chart below. -
Page 12: Switch And Lamp Connection Diagram
Switch and Lamp Connection Diagram CONTACT IN TALLY OUT DISPLAY Display Input Select Control Ground HDMI 1 HDMI 2 Ground HV-T6 Table Box Cable Harness Detail Left Side Harness Right Side Harness Pin / Color Function Pin / Color Function 1 - Green Switch 1 (N.O.) 1 - Green... -
Page 13: Typical
Typical Laptop Camera Laptop HDMI Blu-Ray DVD INSPIRON VGA with Audio HDMI RS232 and Ethernet to Projector Power CEC Controled Input Select and CEC Control Options Automatic - Priority or Last Connected, Front Panel Push Button, Remote Switches and Lamps, or Serial API Scaled Output (Rotary Switch Set) -
Page 14: Functional Block Diagram
Functional Block Diagram DV-HDSS-41-Tx Scaling Switcher Functional Block Diagram Inputs Outputs Ethernet PC to VGA (1) RS-232 Pass Thru VGA Audio HDMI HDMI HDMI HDBaseT DP to HDBT Output DisplayPort (2) w/ CEC Control Transmitter HDMI Switcher HDMI (3) HDMI (4) HDMI Output w/ CEC Control &... -
Page 15: Dimensions
Dimensions... -
Page 16: Operation
Operation Input Select The input source can be selected via 2 different types of Auto Mode, where the unit detects the connection, disconnection and signal presents or through the front panel push button, RS232 serial command or momentary contact closures. When pressing the front panel switch the unit will step though the active inputs in the following order: VGA->DP->HDMI1->HDMI2. -
Page 17: Cec Display Control
inputs with active sources only. If the selected source is not active the LED indicator will flash twice to indicate the source is not active and will not switch. Auto Mode 2 (Last Connected): When power is applied to the switcher it will default to the VGA channel. If multiple active sources are present at power up the unit will auto-switch to the input with the highest priority. -
Page 18: Audio Controls
500 ms. apart. API Control See FSR LIT1628 API manual for serial commands. API commands are sent to the unit on the RS232 port marked "Control". The second RS232 port is used to send serial commands to the HDBT receiver only. -
Page 19: Specifications
Specifications Supported Formats SMPTE: 720 x 480P (59.94Hz/60Hz.), 720 x 576P(50Hz.), 1280 x 720P (50Hz./59.94Hz/60Hz.), HDMI Resolutions (max.) 1920 x 1080P (50Hz./59.94Hz/60Hz.), 3840 x 2160P (24Hz./25Hz./30Hz./50Hz) VESA: 800 x 600, 1024 x 768, 1280 x 768, 1280 x 800, 1280 x 960, 1280 x 1024, 1360 x 768, VGA Resolutions 1366 x 768, 1440 x 900, 1600 x 900, 1600 x 1200, 1680 x 1050, 1920 x 1200 (all @60hz.) Maximum Data Rate... -
Page 20: Limited Warranty
FSR factory or Authorized Repair Stations. This warranty shall be cancelable by FSR at its sole discretion if the unit has been subjected to physical abuse or has been modified in any way without written authorization from FSR. -
Page 21: Contact Information
NOTE: all equipment being returned for repair must have a Return authorization (RMA) Number. To get a RMA Number, please call the FSR Service Department (1-800-332-FSR1). Please display your RMA Number prominently on the front of all packages.
Need help?
Do you have a question about the DV-HDSS-41-TX and is the answer not in the manual?
Questions and answers