Pbx Configuration-[3-6] Trunk-Analog Co Property - Panasonic KX-HTS32 Programming Item List

2.4.6 PBX Configuration—[3-6] Trunk—Analog CO Property
Screen / Tab
DISA Cyclic Tone -
Tone on Maximum
Time (ms)
DISA Cyclic Tone -
Tone off Maximum
Time (ms)
DISA Cyclic Tone -
Repeating Times
of ON/OFF for
Detection
2.4.6 PBX Configuration—[3-6] Trunk—Analog CO Property
Description
Analog CO property settings can be programmed.
Screen / Tab
6.Analog CO Caller ID Waiting to
Property Receive
Outgoing Guard
Time
First Dial Timer
(CO)
Bell Detection -
Bell Start Detection
Timer
Bell Detection -
Bell Off Detection
Timer
Pulse / DTMF Dial
- DTMF Inter-digit
Pause
44 Programming Item List
Setting item
Selects the tone-on
maximum time.
Selects the tone-off
maximum time.
Selects the number of
times of tone on/off to
determine detection.
Setting item
Specifies the length of
time that the PBX waits to
receive Caller ID from an
analog trunk.
Specifies the length of
time after a trunk is
disconnected, during
which the PBX cannot
seize the line.
Specifies the minimum
time that the PBX waits
after seizing a trunk,
before sending the dialed
digits to the telephone
company.
Specifies the minimum
length of a bell signal that
can be recognized by the
PBX as the bell signal
sent from the telephone
company, before the PBX
detects an arriving call.
Specifies the duration of
the bell off detection timer.
Specifies the length of the
DTMF inter-digit pause.
Description
Select
Select
Select
Description
Select
Select
Select
Select
Select
Select
Input Type
This setting can be
selected if DISA Cyclic
Tone is selected for
the Option.
This setting can be
selected if DISA Cyclic
Tone is selected for
the Option.
This setting can be
selected if DISA Cyclic
Tone is selected for
the Option.
Input Type
Note
Note