Panasonic KX-HTS32 Programming Item List page 43

Screen / Tab Setting item
1 Digit AA
Destination
(Extension
Number) - Dial8
1 Digit AA
Destination
(Extension
Number) - Dial9
No Dial Destination
FAX Extension
Busy Mode -Mode
Busy Mode - OGM
5.DISA－ Timer - Delayed
System Answer Timer (s)
Timer - Mute &
OGM Start Timer
after answering (s)
Timer - No Dial
Intercept Timer (s)
Timer - 2nd Dial
Timer for AA (s)
DISA Cyclic Tone -
DISA Cyclic Tone
Detection
Description
Specifies the destination
for each DISA Automated
Attendant (AA) number.
Specifies the destination
for each DISA Automated
Attendant (AA) number.
Selects another
destination when there is
no dialing after DISA
answers.
Specifies the extension
number to which to
transfer a call when a fax
signal is detected.
Selects an operation
Mode when the incoming
call destination through
DISA is Busy.
Selects voice guidance for
when the operation Mode
is OGM in case a line is
busy.
Specifies the length of
time that the caller hears a
ringback tone before
hearing an OGM.
Specifies the length of
time until the caller hears
an OGM after reaching the
DISA line.
Specifies the length of
time after the OGM
finishes playing in which
the caller must begin
dialing before the call is
redirected to the operator.
Specifies the length of
time in which the caller
must dial the second digit
before the DISA AA
Service activates.
Selects the DISA cyclic
tone detection type.
2.4.5 PBX Configuration—[3-5] Trunk—DISA
Input Type
Select
Select
Select
Select
Select
Select This setting can be
selected if OGM is
selected for the Busy
Mode setting.
Select
Select
Select
Select
Select
Programming Item List
Note
43