Download  Print this page

Panasonic KX-HTS32 Programming Item List Page 74

Hide thumbs

Advertisement

3.6.2 Network Configuration—[7-2] Firewall—Packet Filtering
Screen / Tab
Ingress Interface
Egress Interface
Source MAC
Address
Enable
2.Packet
Protocol
Filtering -
Modify
packet
filtering rule
Source IP Type
Source IP Address
Source Netmask
Source Port
Destination IP
Type
Destination IP
Address
74
Programming Item List
Setting item
To specify the input
interface of the packet
from dropdown options.
(e.g. WAN1).
To specify the output
interface of the packet
from dropdown options.
(e.g. WAN2).
This is the source host's
MAC address.
To enable/disable the
particular packet filtering
rule.
To select the protocol. The
options available are TCP,
UDP, ICMP, AH, ESP and
ALL.
The source IP can be ALL,
SINGLE or SUBNET,
involving a range of IP
addresses.
To specify the source IP
address.
To specify a netmask for
the source IP address.
To specify the range of the
source port. Valid for
protocols TCP or UDP
only.
The destination IP can be
ALL, SINGLE or SUBNET,
involving a range of IP
addresses.
To specify the destination
IP address.
Description
Select
Select
MAC
Address2
Check
Select
Select
IP Address
Subnet
Mask4
Unsigned
Number
Select
IP Address
Input Type
This feature is
available when
SINGLE or SUBNET is
selected in the Source
IP Type.
This feature is
available when
SUBNET is selected in
the Source IP Type.
This feature is
available when
SINGLE or SUBNET is
selected in the
Destination IP Type.
Note

Advertisement

Table of Contents

   Related Manuals for Panasonic KX-HTS32

This manual is also suitable for:

Kx-ht824

Comments to this Manuals

Symbols: 0
Latest comments: