Panasonic KX-HTS32 Programming Item List page 73

Screen / Tab Setting item
Enable
Modify Button
2.Packet Protocol
Filtering -
Add a packet
filtering rule
Source IP Type
Source IP Address
Source Netmask
Source Port
Destination IP
Type
Destination IP
Address
Destination
Netmask
Destination Port
3.6.2 Network Configuration—[7-2] Firewall—Packet Filtering
Description
To enable/disable the
particular packet filtering
rule.
Clicking this button allows
you to modify a packet
filtering rule.
To select the protocol. The
options available are TCP,
UDP, ICMP, AH, ESP and
ALL.
The source IP can be ALL,
SINGLE or SUBNET,
involving a range of IP
addresses.
To specify the source IP
address.
To specify a netmask for
the source IP address.
To specify the range of the
source port. Valid for
protocols TCP or UDP
only.
The destination IP can be
ALL, SINGLE or SUBNET,
involving a range of IP
addresses.
To specify the destination
IP address.
To specify a netmask for
the destination IP address.
To specify the range of the
destination port. Valid for
protocols TCP or UDP
only.
Input Type
Check
-
Select
Select
IP Address This feature is
available when
SINGLE or SUBNET is
selected in the Source
IP Type.
Subnet This feature is
Mask4 available when
SUBNET is selected in
the Source IP Type.
Unsigned
Number
Select
IP Address This feature is
available when
SINGLE or SUBNET is
selected in the
Destination IP Type.
Subnet This feature is
Mask4 available when
SUBNET is selected in
the Destination IP
Type.
Unsigned
Number
Programming Item List
Note
73