Network Configuration-[6-3] Wireless-Security Settings - Panasonic KX-HTS32 Programming Item List

3.5.3 Network Configuration—[6-3] Wireless—Security Settings
Screen / Tab
Modify Button
2.Main AP SSID
Settings -
WLAN AP
AP Name
Configuration
Settings
Maximum Client
Limit
Enable Hidden
SSID Mode
AP Isolation
3.5.3 Network Configuration—[6-3] Wireless—Security Settings
The wireless security settings can be programmed.
Screen / Tab
3.Security AP name
Settings -
WLAN
Security
Settings
SSID
Security Selection
- Security
Security Selection
- Authentication
Type
Security Selection
- Encryption Type
68 Programming Item List
Setting item
Clicking this button allows
you to modify a WLAN AP
configuration.
Service Set Identifier of
AP.
AP Name - Unique
Identifier within the PBX.
Indicates the maximum
number of stations that
can connect to the
corresponding AP.
Whether to hide SSID in
beacon frames.
Enables or disables the
AP Isolation feature.
Setting item
Displays the AP name.
Displays the SSID.
Selects the Security.
Selects the authentication
type.
Selects the encryption
type.
Description
-
Text Router
SSID
Text
Router2
Unsigned
Number
Check
Select
Description
Input Type
Input Type
Label To change this setting,
refer to 3.5.2 Network
Configuration—[6-2]
Wireless—Main AP
Settings.
Label To change this setting,
refer to 3.5.2 Network
Configuration—[6-2]
Wireless—Main AP
Settings.
Select
Select This feature is
available when the
following settings are
specified:
•
Security: Basic and
Encryption
Type:WEP
•
Security: Except for
Basic
Select
Note
Note