Table of Contents
Advertisement
Chapter 2 Preparations
Finally, connect the provided
power cord to an outlet.
For connecting with UPS, see
the next section
REAR
Management
LAN port
Hub, switching hub, etc.
1000 BASE-T/
100 BASE-TX/
10 BASE-T
Note the following precautions to connect cables.
•
When the device is not Plug and Play device, turn off the server and devices to be connected before
connecting.
•
If connecting any peripheral device and its interface cable made by other companies (a third party),
contact your sales representative to check if they can be used with the server beforehand.
•
Fix the power cord or interface cable with cable ties. Do not bend the cable so excessively to stress the
cable.
•
Make sure that no pressure is applied on the plug of power cord.
98
Hub, switching hub, etc.
10G BASE-T/
1000 BASE-T/
100 BASE-TX/
10 BASE-T
Data LAN
port
USB device
Display unit
Note
When connecting the line, use the certified card.
Express5800/D120h User's Guide
2. Installation and Connection
Hub, switching hub, etc.
1000 BASE-T/
100 BASE-TX/
10 BASE-T
Management
LAN port
USB device
Hub, switching hub, etc.
10G BASE-T/
1000 BASE-T/
100 BASE-TX/
10 BASE-T
Data LAN
port
Advertisement
Table of Contents
