NEC EXP710 User Manual page 109

Chapter 3 Setup
Category
Set the boot mode to Legacy
Boot
BIOS mode according to your
OS.
Change the boot order of
devices
Use console redirection feature Advanced → Serial Port Console
Set a password
Security
When the server is supplied
UPS
with power from UPS, always
Powerlink
turn on the power.
If the server is turned off by
using POWER switch, leave it
OFF even when UPS supplies
power.
Keep the power OFF even
when UPS supplies power.
Description
Set as follows.
Step1:Boot – Boot Mode Select →
LEGACY
Step2:Advanced – CSM Configuration
– CSM Support → Enabled
Step3:Boot option filter → LEGACY
only
Network → LEGACY
Storage → LEGACY
Video → LEGACY
Other PCI devices → LEGACY
Step4:Advanced – PCI Subsystem
Setting – Onboard LAN1 I/O
ROM → Enable*
Advanced → PCI Subsystem
Setting →Onboard LAN2 I/O
ROM → Enable*
* If you do not use at LEGACY BIOS
mode, set the setting of LAN1 I/O ROM
and the LAN2 I/O ROM to Disabled.
Boot → FIXED BOOT ORDER Priorities
→ Change the boot priority
Redirection → COM1 → Console
Redirection → Enabled
Or
Advanced → Serial Port Console
Redirection → COM2/Serial Over
LAN→ Console Redirection → Enabled
Security → Administrator Password →
Enter a password
Security → User Password → Enter a
password
Advanced → Chipset Configuration →
Restore AC Power Loss → Power On
Advanced → Chipset Configuration →
Restore AC Power Loss → Last State
Advanced → Chipset Configuration →
Restore AC Power Loss → Power off
Express5800/D120h User's Guide
To be changed
For details, see Installation
Guide.
Factory settings is set to UEFI.
For detail of the CSM menu,
see chapter 2((9) CSM UEFI
Driver Configuration submenu
in 1.2.2 Advanced) in
Maintenance Guide.
When you use
EXPRESSBUILDER, set
CD/DVD to the highest priority.
If password is set, a message to
enter password is displayed at
next time SETUP is launched.
2. BIOS Setup Utility (SETUP)
Remark
-
-
-
-
109