NEC EXP710 User Manual page 58

Chapter 2 Preparations
1. Installing Internal Optional Devices
Remove the two screws, and remove the
bracket.
Remove the PCI bracket.
Screw
To confirm the slot to install a card, see the table on Chapter 2 (1.8.2 Supported cards and
available slots).
Mount a PCI card (RAID controller) to the
PCI #1 riser card.
Insert the PCI card (RAID controller) to PCI
#2 riser card while aligning the terminal of
the PCI card with the PCI #2 riser card slot.
At this time, secure the bracket that was
removed in step 4 with the screws that were
removed in step 3.
58
Express5800/D120h User's Guide