NEC EXP710 User Manual page 113

Chapter 3 Setup
3. BMC/CMC
 Important Notice 
If you use the initial control password on a device controlled via a network, you have a risk of permitting
an illegal access by a malevolent third party.
If the device is taken over by an illegal access, it may disturb the availability and completeness to
damage the system and may be abused for a cyber-attack foothold by botnet.
The initial password of this product is absolutely set for initialization in maintenance operation. Be sure
to change the password in initial setting.
If you operate the system with the initial password and cause an illegal access, we do not take any
responsibility for it.
Even if you change the password, you have difficulty in preventing an illegal access with those in low
intensity (short ones) and easily-found ones (such as "123456789", "abcdefg", "password" and
"Administrator").
Change the password to those in high intensity (we recommend more than 8 characters with upper
case/lower case/numeric/symbols mixed.)
<How to change the password>
See "Using remote management" and "Changing the default password" in Chapter 5 of the BMC/CMC
management console user's guide.
113
Express5800/D120h User's Guide