Sound Devices MixPre-3 User Manual page 43

s -
ub menu
Sample Rate
Bit Depth
Pre-roll Time
Pre-roll Mode
Rec L,R Mix
Rec Trigger
Setting File Format
By default, all armed tracks are recorded to the SD card as a polyphonic WAV
file. It is possible to record only the armed ISO tracks or only the armed L and
R tracks.
To set file format:
1. Tap the Menu icon.
2. Tap RECORD > File Format.
3. Select a file format. Options include Wav Poly or Wav Mono.
D
escription
The internal sample rate and sample rate
of recorded WAV files.
The default is 48kHz.
The bit depth of recorded WAV files.
The default is 24.
Adjust the amount of record time to be
appended before each recording. Maximum
value is 3 seconds when recording WAV
Mono files to any media.
Higher sample rates also limit pre-roll.
Rates of 96k should be 3 seconds.
The default is 0 seconds.
Sets range for pre-roll and for which
tracks.
When set to All Tracks, 0-5 second range is
applied across all ISOs and Mix tracks.
When set to Mix Tracks, two ranges are
possible: 0-30 seconds if both L & R are
armed for recording; 0-60 seconds if only
L or R is armed.
Arms L and/or R mix buses.
Sets record triggering from either timecode
or HDMI flags. The default is Off.
RECORDING
o
ptions
• 44.1kHz
• 48kHz
• 96kHz
• 24
• 16
• 0 - 5 seconds (1s increment)
• All Tracks
• Mix Tracks
• Off
• L
• R
• L&R
• LR Linked
• Off
• HDMI flag
• Timecode
43