Sound Devices MixPre-3 User Manual page 18

User Guide
2. Tap SOLO. This toggles the setting between Off and On.
The LED around the input's fader blinks amber when the input is soloed.
To solo an input signal via the HP PRESET screen:
1. Tap the Menu icon.
2. Tap the Headphone icon.
3. On the HP PRESET screen, tap SOLO/MUTE.
4. Tap an input number or turn the Headphone encoder to highlight the input.
5. Tap SOLO to solo the input highlighted in green.
The LED around the input's fader blinks amber and the background color of
the on-screen input box turns orange when the input is soloed.
When OUTPUT > HP Solo is set to Individual, only one input may be selected for
i
soloing. Selecting a second input will remove the original selection from soloing.
When OUTPUT > HP Solo is set to Multiple, then after soloing one input, a second
and third may be selected for soloing, one after another, as well.
6. (For Multiple HP Solo) Repeat steps 3 and 4 as needed.
To mute input signal in headphones:
1. Tap the Menu icon.
2. Tap the Headphone icon.
3. On the HP PRESET screen, tap SOLO/MUTE.
4. Tap an input number or turn the Headphone encoder to highlight the input.
18