JUKI MS-1261A-DWS Instruction Manual page 24

Table of Contents

Advertisement

When you turn ON the power to the sewing machine, the sewing screen for the pattern that is currently se-
lected is displayed.
This sewing machine is able to sew free sewing patterns and step sewing patterns. As many as 99 different
sewing patterns can be created by combining free sewing patterns and step sewing patterns.
In the case of a free sewing pattern, different sewing conditions can be adopted respectively for sewing flat
sections and multi-layered sections of material.
In the case of a step sewing pattern, separate sewing conditions can be adopted for sewing a material on a
step-by-step basis.
The below-stated section of this Instruction Manual describes the free sewing patterns. Refer to
to edit a step sewing pattern" p. 34
Display
A
Pattern No.
B
Cloth pulling amount *1
C
Cloth puller pressure *1
D
Sewing speed *1
E
Stitch length *3
F
Presser foot pressure *1
G
State of the material
under the cloth puller
H
State of the material
under the presser foot
I
Simple-locked state
J
Part number / process or
comment
for the description about step sewing patterns.
J
A
B
D
E
Sewing screen <Free sewing pattern>
Pattern No. that is being selected is displayed. (No. 1 to No. 99)
Cloth pulling amount is displayed.
Cloth puller pressure is displayed.
Sewing speed is displayed.
Stitch length set with the memory switch S003 is displayed.
Presser foot pressure is displayed.
State of the material placed under the cloth puller is displayed.
Top end of
Flat section
material
State of the material placed under the presser foot is displayed.
Top end of
Flat section
material
ON / OFF of the simple lock is displayed.
Part number is displayed on the upper line and the process is displayed on the low-
er line. Or, comment is displayed on two lines (upper and lower lines). (Content of
display, i.e., the "part number and process" or the "comment", can be changed over
with the memory switch U404. Refer to
details).
C
I
G
H
F
Content
Multi-layered
No material
section begins
During the
Multi-layered
multi-layered
section be-
section of mate-
gins
"4-5-1. Memory switch data" p. 45
– 21 –
"4-4-6. How
Cloth puller is
not used
End of the
multi-layered
section of mate-
rial
rial
No ma-
terial
for

Advertisement

Table of Contents
loading

Table of Contents