Network Video Recorder User Manual
Chapter 2 Getting Started
2.1 Startup and Shutdown
2.1.1 Startup
Plug in the power cord, press the power switch, the power indicator light should turn bright. The device will begin
to start. After the device starts up, the video output defaults to multiple screen output mode.
2.1.2 Shutdown
Option 1: Press the power key on front panel to shutdown the device(should be supported by the device).
Option 2: Click Start→Shutdown→Confirm (Prompt: It is recommended to use this way, in order to avoid
damage to the device when suddenly powered off.)
Figure 2.1 Shutdown Menu
2.2 Login
If NVR first start-up or has logged out, you must login the device before operating the menu and other functions.
Figure 2.2 Login Interface
Steps:
1. Click Start button on the top of screen.
2. Click Login in the drop-down menu.
3. Input the Password in the pop-up interface(Default password: 888888).
4. Click Login to log in.
3