Table of Contents
Advertisement
Click Save button to save the settings.
4.3 Configuring Privacy Mask
Purpose:
You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator. The privacy
mask can prevent certain surveillance areas to be viewed or recorded.
Steps:
Enter the Privacy Mask Settings interface.
Channel Setting ->Channel Parameter ->Video Tampering
Select the camera to set privacy mask.
Click the check-box of Enable Video Tampering to enable this feature.
Use the mouse to draw a zone on the window, up to 4 privacy mask zones can be configured and the size
of each area can be adjusted.
The configured privacy mask zones on the window can be cleared by clicking the
Click the Save button to save the settings.
Network Video Recorder User Manual
Figure 4.5 Video Mask Configuration Interface
11
button.
Advertisement
Table of Contents
