12.1 Viewing and Setting Device Parameter
Steps:
(1) Enter the Device Parameter interface
System Setting->Device Parameter
(2) Viewing and Setting.
Device ID: The ID to log-in mobile client software
Device Name: Empty by default.
Product Serial No.: Shows the device serial number.
Channel Number: Shows the maximum channel of the device.
HDD Number: Shows the numbers of HDD installed.
Alarm Input Number: Shows the numbers of local alarm input of the device.
Alarm Output Number: Shows the numbers of local alarm output of the device.
Language Select: Select and show the language of the device.
Resolution: Shows the output resolution of the device.
Device Ability: Shows the ability of the device.
Channel information: Choose and show the channel information.
Real-time Playback: Real-time Playback on live view.
Plug and Play Protocol Setting.
Note:
You can add the device to your mobile client software via scanning the QR Code.
12.2 System Information
(1) Device Information
Device information shows the Firmware Version and Hardware Version of the device.
Network Video Recorder User Manual
Chapter 12 NVR Maintenance
12.1 Device Parameter
34