Linkage Setting; Setting Motion Detection Alarm - GEMINI TECHNOLOGY GT-N78 series User Manual

 Hard Disk Error.
 Hard Disk Full.
Network Disconnected.

IP Address Conflict.

Steps:
(1) Enter Exception interface.
System Setting->Alarm Management-> Exception
(2) Choose Abnormal Type.
(3) Select Trigger Mode.
(4) Click Save button to save the settings.

10.4 Linkage Setting

10.5 Setting Motion Detection Alarm

Steps:
(1) Enter Motion Detection interface of channel parameter and choose a channel you want to set up motion
detection.
Network Video Recorder User Manual
10.4 Exception Setting Interface
10.5 Linkage Setting Interface
26