4.1 Configuring OSD Settings
Purpose:
You can configure the OSD(On-screen Display) settings for the camera, including camera name, date /time, etc.
Steps:
(1) Enter the OSD Configuration interface.
Channel Setting ->Channel Parameter ->Display Setting
(2) Select the channel of camera to configure OSD settings.
(3) Local Channel Name setting.
Check the check-box before Show Local Channel Name, then enter the Local Channel Name in the
text field.
Click Save button, the name that enter will show on the screen. You can use the mouse to click and
drag the text frame on the window to adjust the OSD position.
(4) IP Camera Name setting(should be supported by the camera).
Check the check-box before Show Channel Name, then enter the Channel Name in the text field.
Click Save button, the name that enter will show on the screen, You can use the mouse to click and
drag the text frame on the window to adjust the OSD position.
(5) Select the Date & Time Format(should be supported by the camera).
(6) Image Setting: Adjust the Brightness, Contrast, Saturation and Hue of the channel, shown as following
figure.
Network Video Recorder User Manual
Chapter 4 Camera Settings
Figure 4.1 OSD Configuration Interface
9