(6) Click Save button to save the settings.
10.7 Detecting Video Mask Alarm
Purpose:
Trigger alarm when the lens is covered and take alarm response action(s).
Steps:
(1) Enter Video Mask Alarm interface of channel parameter and choose a channel you want to set up Video Mask
Alarm
Channel Setting->Channel Parameter->Video Mask
(2) Set the video mask alarm handling action of the channel.
Check the check-box of Enable Mask Alarm.
Select the sensitivity.
Use the mouse to draw an area you want to detect video mask.
(3) Set up the alarm schedule of the channel.
(4) Set up the linkage operation of the channel.
(5) Click Save button to save the settings.
Network Video Recorder User Manual
10.12 Video Mask Configuration Interface
29