Goods Detection - GEMINI TECHNOLOGY GT-N78 series User Manual

 A->B: Only the object crossing the configured line from the A side to the B side can be detected.
 B->A: Only the object crossing the configured line from the B side to the A side can be detected.
(7) Statistics setting.
Enable statistics.

Statistics interval: Set the time interval of object count.
Alarm threshold: Set the value of object count, which will begin to alarm when the counts result larger
 Enable total statistics.
Statistics period: Set the period of time to progress the total statistics.
Total alarm threshold: Set the value of total count numbers, which will begin to alarm when the
Area(part per 10 thousand): The size of object begin to count.
(8) Set the schedule time.
(9) Set the Linkage Operation.
(10) Click Save button to activate the settings.

11.3 Goods Detection

Purpose:
Object removal detection function detects the objects removed from the pre-defined region, such as the exhibits on
display, and a series of actions can be taken when the alarm is triggered.
Steps:
(1) Enter the detect mode setting interface.
Channel Setting->Smart Detection->goods detect
(2) Select the channel to configure the goods detect.
(3) Check the Enable check-box to enable this function.
(4) Set the numbers of detect area.
(5) Choose the detect type.
(6) Set the area(part per 10 thousand).
(7) Set the detect time: The time exceed which will begin to alarm.
(8) Set the Schedule plan.
(9) Set the Linkage Operation.
Network Video Recorder User Manual
than it.
counts result larger than it.
11.2 Count Detection
31