Interroll MultiControl Instruction Manual page 55

Power Ready
- -
- -
- -
- -
- -
If several errors occur at the same time, only the highest priority error is displayed.
Troubleshooting see "Troubleshooting", page 50.
➢
Version 3.0 (08/2018)
Translation of original instruction manual
Net Fault
Run
- Flashes
6 x
- Flashes
7 x
- Flashes
8 x
- Flashes
9 x
- Flashes
10 x
Flashes
10 x
Troubleshooting
Meaning
Voltage error overvoltage
Temperature in the MultiControl
too high.
Overload protection of the
brake chopper resistor active.
Handshake communication
disturbed. See the instructions
for ZPA and ZPA + applications.
No connection to the neighbour.
See the instructions for ZPA and
ZPA + applications
A configured neighbour has an
error (see ZPA+,
"RemoteEmergency" in the error
log)
Priority
4
6
7
49