Safety Related Information; State Of The Art; Intended Use; Areas Of Application - Interroll MultiControl Instruction Manual

Safety related information

2 Safety related information

2.1 State of the art

The Interroll MultiControl is built in compliance with applicable standards and state of the art
technology and is delivered safely. Nevertheless, hazards can arise during use.
Failure to follow the instructions in this manual may result in life-threatening injuries.
In addition, the local accident prevention regulations and general safety regulations applicable to
the area of application must be complied with.

2.2 Intended use

The MultiControl may only be used in industrial environments for industrial purposes within the
specified performance limits specified in the technical data.
It controls up to four Interroll RollerDrive or VDC Motors and must be integrated into a conveyor
unit or conveyor system before commissioning.
A corresponding adapter must be used to connect a VDC motor.

Areas of application

The following areas of application are possible:
Using a Function of a PLC
PLC
No None
Yes Influencing the ZPA logic
-
Tracking of conveyed items
-
Fault diagnosis
-
Yes The PLC program controls all
-
connected RollerDrive
Tracking of conveyed items
-
Fault diagnosis
-
4
Function of the MultiControl
Realization of the ZPA Logic
Implementation of PLC specifications
Function as network card
Sends the state of all Sensors,
RollerDrive and, if necessary, error
information to the PLC
Version 3.0 (08/2018)
Translation of original instruction manual