Resetting The Overheat Protectors; Spare Parts - Harvia HPC(S)7U1H Owner's/Operator's Manual

3.8. Resetting the Overheat Protectors

If the temperature of the sauna room becomes
dangerously high, the overheat protector will
permanently cut off the supply of the heater. The
overheating protectors can be reset after the heater
Figure 9. Reset buttons for overheat protectors
Use only parts approved by the manufacturer!
1 Heating element 2250 W/240 V
Heating element 3000 W/240 V
Heating element 3500 W/240 V
Heating element 2250 W/208 V
Heating element 3000 W/208 V
Heating element 3500 W/208 V
2 Overheat protector
3 Temperature sensor
EN

4. SPARE PARTS

1
Y10-0005
Y10-0004
Y10-0002
Y10-0004
Y10-0003
Y10-0001
ZSK-764
WX248
has cooled down. See figure 9. Please check that the
stones are piled properly and the sensor is installed
according the installation instructions. See also the
installation instructions for control unit.
2
HPC(S)7U1H
HPC(S)9U1H
HPC(S)11U1H
HPC(S)7U3H
HPC(S)9U3H
HPC(S)11U3H
3
3
3
3
3
3
3
1
1
11