AEMC 6255 User Manual page 25

1.800.561.8187
Pressing the ► button while "dEL. Y" is in the display will delete the
8.
contents of the selected object. The display will momentarily display
dashes "-----" and then return to display the next highest object location.
Pressing the ► button while "dEL. n" is in the display will cancel the
9.
request.
10. Repeat this process for each object to be deleted.
11. To clear the entire memory contents, turn the rotary switch to the SET-
UP position.
12. Press the ▲ button until "nEn" appears on the top line of the display.
13. Press the ► button, "dEL" will appear on the lower line of the display.
14. Delete all data from memory by first pressing the ► button, then
toggling between Yes "dEL. Y" or No "dEL. n"
15. Pressing the ► button while "dEL. Y" is in the display will clear all
memory of stored measurements.
16. Pressing the ► button while "dEL. n" is in the display will cancel the
request.
Only objects with data stored in them can be accessed.
To return to the beginning of the SET-UP menu, press the ▲ button when "nEn"
is on the top line of the display.
Micro-Ohmmeter Model 6255
www.
information@itm.com
.com
25