AEMC 6255 User Manual page 20

1.800.561.8187
4.2.6. Setting the Language used for Printing Reports (LAnG)
1. Turn the rotary switch to the SET-UP position.
Press the ▲ button until "LAnG" appears on the top line of the display.
2.
Press the ► button to enter the language selection sub-menu.
3.
Next, press the ▲ button to toggle between English (Lg Gb) or French
4.
(Lg F).
Press the ► button to validate the selection and return to the top level
5.
of the Language set-up menu.
To proceed to the next programming variable, press the ▲ button.
6.
4.2.7. Setting the Value for the Reference Temperature (trEF)
1. Turn the rotary switch to the SET-UP position.
Press the ▲ button until "trEF" appears on the top line of the display.
2.
Press the ► button to enter the reference temperature sub-menu. The
3.
current reference temperature will be displayed with the leading digit
flashing.
Use the ▲ button to change the leading digit. The minus (-) symbol can
4.
also be programmed in this location.
When the desired value is reached, press the ► button to move the
5.
next digit to the right.
Use the ▲ button to change this digit, then press the ► button to again
6.
move to the next digit to the right.
7. Repeat this process for each of the 5 digit locations.
After the 5th digit is programmed, press the ► button again to return to
8.
the top level of the Reference Temperature set-up menu.
To proceed to the next programming variable, press the ▲ button.
9.
The program limits for the reference temperature are 32.0 to
130.0°F and -10.0 to 130.0°C. Attempting to set values outside
these limits will cause error message "Err23" (Entry Out of Range)
to appear in the display.
20
www.
Micro-Ohmmeter Model 6255
information@itm.com
.com