Winmate I370 User Manual page 65

Onboard Device/USB 2.0 Controller
The options for this field are Enabled and Disabled. By default, this field is set to
Enabled. In order to use USB 2.0, necessary OS drivers must be installed first. Please
update your system to Windows 2000 SP4 or Windows XP SP1.
Onboard Device/USB Keyboard Support
The options for this field are Enabled and Disabled. By default, this field is set to
Disabled.
Onboard Device/USB Keyboard Support
The options for this field are Enabled and Disabled. By default, this field is set to
Disabled.
Onboard Device/AC97 Audio
The default setting of the AC97 Audio is Auto.
Onboard LAN/LAN1 Devices
The default setting is Enable.
SuperIO Device / Onboard Serial Port1 ( Port2)
These fields allow you to select the onboard serial and parallel ports and their
addresses. The default values for these ports are:
Serial Port 1
Serial Port 2
SuperIO Device / UART Mode Select
This field determines the UART 2 m ode in your computer. The default value is
Normal. Other options include IrDA and ASKIR.
Power On After Fail
The setting configures the system power on status when power is restored to the
system after a power failure occurrence. The default setting is Of f.
GiGA Lan (Lan1) Boot ROM
The function is boot from LAN, and the default setting is disable.
Onboard Serial Port3
These fields allow you to select the onboard serial ports and their addresses. The
default values for these ports are:
On Board Serial Port 1
I370 Motherboard User Manual
3F8/IRQ4
2F8/IRQ3
Disable
3F8
2F8
3F8
2F8
56