Fp-Fns Block Bacnetip - Panasonic FPSIGMA Technical Manual

Parts and Functions
State
Red
Red, 1 flash
Red, 2 flashes
Red, 3 flashes*
Red, 4 flashes*
*3 flashes:
*4 flashes:
LINK/Activity LED
LED State
Off
Green
Green, flickering (10Hz)
Ethernet interface, RJ45
The Ethernet interface operates at 100Mbit, full duplex, as required by PROFINET.

2.4.5 FP-FNS Block BACnetIP

This FP-FNS block connects the unit to a BACnetIP network.
Front view
20
Indication
Exception error
Configuration Error
IP Address Error
Station Name Error
Internal Error
Indication
No Link
Link
Activity
No. Item
1
Network status LED
2
Module status LED
3
Ethernet port 1
4
Ethernet port 2
5
Link/Activity LED (port 1)
6
Link/Activity LED (port 2)
Comments
FP-FNS state = 'EXCEPTION'
Expected configuration by controller
differs from real configuration.
IP address not set
Station Name not set
FP-FNS has encountered a major
internal error.
Comments
No link, no communication present
Ethernet link established, no
communication present
Ethernet link established,
communication present