Fp-Fns Block Bacnet Ms/Tp - Panasonic FPSIGMA Technical Manual

Parts and Functions
Ethernet interface, RJ45
The Ethernet interface supports autonegotiation and Auto MDI-X, with 10/100Mbit, full or half
duplex operation.

2.4.6 FP-FNS Block BACnet MS/TP

This FP-FNS block connects the unit to a BACnetMS/TP network.
Front view
Network Status
During start-up, a test sequence is performed on this LED.
State
Off
Green
Flashing green (1Hz)
Red
Flashing red (1Hz)
Module Status
During start-up, a test sequence is performed on this LED.
State
Off
Green
Red
Flashing red (1Hz)
22
No.
1
2
3
Indication
No power
On-line, one or more BACnet messages have arrived
Module has active COV subscriptions
At least one value object has one or more events enabled
On-line, waiting for first BACnet message
FATAL error
Connection timeout. No BACnet message has been received within the configured
'process active timeout' time.
A COV or Alarm/Event notification could not be sent to its recipient
Indication
No power
Operating in normal condition
Major fault (EXCEPTION-state, FATAL error etc.)
Recoverable fault(s)
Item
Network status LED
Module status LED
BACnet MS/TP connector