Javad HPT404BT JL User Manual page 14

Figure 22. HPT404BT JL UHF Modem Router
tab
6. Connect Serial Port
Use any application to connect serial port of
HPT404BT JL with following parameters:
• Baudrate 115200
• Parity none
• Data Bits 8
• Stop Bits 1
• Handshake hardware
HPT404BT JL USER MANUAL
...Configure TRIUMPH-2 and
HPT404BT JL to provide TRIUMPH-2
services through Internet
In this configuration HPT404BT JL will share
its internet connection (established by GSM
interface) with TRIUMPH-2 connected to
HPT404BT JL as a WiFi client.
The following are the steps of configuration
of HPT404BT JL:
1. Connect to HPT404BT JL via web interface.
2. GSM configuration:
In the Communication/GSM tab set the APN
parameters (if necessary) and insert the SIM
card to its slot(SIM card must by provide Stat-
ic IP).
In the Communication/Power Management
tab activate the GSM interface and wait for
registering in the network and Internet ac-
cess availability. Detailed connection status
you can check in Status/GSM tab.
Figure 23. HPT404BT JL GSM configuration tab
3. Setup WiFi configuration
14