Table of Contents
Advertisement
4-9-1 Setting the GAIN Selector Values
Before using the camcorder, use the MASTER GAIN page of the setup
menu to set the gains corresponding to the L, M, and H positions of the
GAIN selector and the TURBO GAIN switch, which switches the gain
of the video amplifier.
Setting the GAIN selector values
Follow the procedure below to set a gain value for each switch position.
1,2,7
4,5,6
1
Set the MENU ON/OFF/PAGE switch to ON.
The page that was on the screen when the last menu operation ended
appears on the viewfinder screen. (When this menu is first used, the
lowest-numbered one of the currently selected pages appears.)
2
Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until
the MASTER GAIN page shown on the next page appears (or use
the rotary encoder).
Setting the GAIN selector values
Chapter 4 Adjustments and Settings for Recording
3
(Continued)
4
4-77
Advertisement
Table of Contents
