Table of Contents
Advertisement
2
Push the AUTO W/B BAL switch to BLK, and release the switch.
The switch returns to the center position, and the adjustment is
completed.
During adjustment, the following messages are displayed on the
viewfinder screen (in display mode 2 or 3).
BLACK:OP
-BLACK SET-
The black balance adjustment ends in a few seconds with the
message "BLACK : OK," and the adjustment setting is
automatically stored in memory.
....................................................................................................................................
1) If the existing black balance adjustment is satisfactory, the message "BLACK
BAL" may not appear, that is, the automatic black balance adjustment may be
omitted to save time.
AUTO W/B BAL switch
The messages change in the following
sequence : -BLACK SET-
-BLACK BAL-
Message during adjustment
Chapter 4 Adjustments and Settings for Recording
1)
-CHECK-
(Continued)
4
4-3
Advertisement
Table of Contents
