Table of Contents
Advertisement
3
Check that there are no obstructions near the cassette lid, then press
the EJECT button to open the cassette lid.
4
After checking the points below load the cassette, and close the
cassette lid.
• The cassette is not write-protected.
3
• There is no slack in the tape.
• The leader tape is wound on the take-up reel.
Basic procedure for shooting : from adjusting the
black balance and white balance to stopping recording
After turning on the power and loading a cassette, set the switches and
selectors as shown below and begin operation.
Iris: Automatic
Zoom: Automatic
3-6
Chapter 3 Recording and Playback
DISPLAY: ON
Switch and selector settings before shooting
AUDIO SELECT CH-
1/CH-2: AUTO
F-RUN/SET/R-RUN:
F-RUN or R-RUN
OUTPUT/
(set as needed)
DCC: CAM,
DCC ON
Advertisement
Table of Contents
