Table of Contents
Advertisement
?E06*MASTER GAIN
LOW
MID
HIGH
TURBO
4
3
Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the desired position (LOW, MID, HIGH or
TURBO) (or use the rotary encoder).
4
Press the rotary encoder, to display a question mark to the left of the
display.
5
Turn the rotary encoder to display the gain value you wish to select.
Any of –3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42, or 48 dB can be set for
each of the L, M, and H positions, in any sequence.
For TURBO, any of –3, 0, 3, 6, ..., 30, 36 , 42, or 48 dB
selected.
Press the MENU CANCEL/PRST/ITEM switch to CANCEL/PRST
to reset the gains to the factory set values (L = 0 dB, M = 9 dB, H =
18 dB, and TURBO = 42 dB).
To change the gain corresponding to another switch position, return
to step 3.
....................................................................................................................................
1) Video gain boosted from 30 dB to 36, 42, or 48 dB by combining blocks of 2, 4,
or 8 adjacent pixels of the CCD.
4-78
Chapter 4 Adjustments and Settings for Recording
:
0dB
:
9dB
:
18dB
:
42dB
MASTER GAIN page (factory settings)
Gain corresponding to L position of GAIN
selector
Gain corresponding to M position of GAIN
selector
Gain corresponding to H position of GAIN
selector
Gain corresponding to TURBO GAIN button
selection
1)
can be
Advertisement
Table of Contents
