Testing The Earphone And Speaker; Testing External Microphones - Sony DVW-707/707P Operation Manual

2
Set the AUDIO SELECT CH-1/CH-2 switches to MANUAL.
3
Adjust the MIC AUDIO LEVEL control on the front of the
camcorder. Check that the level indications increase as the control is
turned counterclockwise.

4 Testing the earphone and speaker

1
Turn the MONITOR control and check that the speaker volume
changes accordingly.
2
Connect an earphone to the EARPHONE jack. Check that the
speaker sound is cut off and that you can hear the sound from the
microphone in the earphone.
6
3
Turn the MONITOR control and check that the earphone volume
changes accordingly.

5 Testing external microphones

1
Set the LINE/MIC selectors to MIC.
2
Connect external microphones to the AUDIO IN CH-1/CH-2
connectors.
3
Set the AUDIO IN switches to REAR.
4
Aim the microphones at a sound source.
5
Check that the audio level meter in the display panel and the audio
level indication in the viewfinder reflect the changing sound level.
Alternatively, with a single microphone, check each channel in turn.
6-8
Chapter 6 Maintenance