Table of Contents
Advertisement
2
Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until
the SHUTTER page shown as below appears (or use the rotary
encoder).
?E09*SHUTTER
4
a) 1/100 for DVW-707/709WS/790WS or 1/60 for DVW-707P/709WSP/
790WSP
3
Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the mode or shutter speed you want (or use
the rotary encoder).
4
To use the selected mode or speed (the "ON" setting), turn the rotary
encoder counterclockwise as seen from the front of the camera. In
order not to use it (the "OFF" setting), turn the rotary encoder
clockwise.
Note that pushing the MENU CANCEL/PRST/ITEM switch to
CANCEL/PRST has no effect on the SHUTTER page. To select
another mode or speed, return to step 3.
5
To end the menu operation, set the MENU ON/OFF/PAGE switch to
OFF. (When you close the cover, the MENU ON/OFF/PAGE switch
is set to OFF automatically.)
The setup menu disappears from the viewfinder screen and the
display indicating the current status of the camcorder appears along
the top and bottom of the viewfinder.
4-20
Chapter 4 Adjustments and Settings for Recording
EVS
CLS
1/60
1/125
1/250
1/500
1/1000
1/2000
SHUTTER page (factory settings)
EVS mode
:
ON
:
ON
CLS mode
:
ON
:
ON
:
ON
Shutter speeds selectable
:
ON
:
ON
in standard mode
:
ON
Advertisement
Table of Contents
