Table of Contents
Advertisement
5-1-6 Using the Anton Bauer Ultralight System
By fitting the camcorder with the Anton Bauer Ultralight System, and
setting the LIGHT switch to AUTO, you can switch the light on and off
automatically as you start and stop VTR operation. (This system operates
with lights powered by 12 V, with a maximum power consumption of
50 W.)
Notes
• The AC-DN1 cannot be used when the light is used.
• The light cannot be used if both the CA-705/755 and camera control
unit are connected to the camcorder.
5
5-1-7 Using the Anton Bauer Intelligent Battery
System
You can equip the camcorder with a special battery mount which the
Anton Bauer Corporation has developed for its Intelligent Battery
System and Ultralight System.
When the camcorder is used with an Anton Bauer Digital Magnum series
battery, the remaining battery capacity is shown numerically in the
viewfinder display.
Contact your Sony representative for more information.
5-9
Chapter 5 Setting Up the Camcorder
Advertisement
Table of Contents
