Statistical Information (History) - Uwatec Aladin ONE Matrix User Manual

4.2.2.1 Page 1
Max depth
Dive number
4.2.2.2 Page 2
Dive Altitude level (when >1)
Minimum temperature
4.2.2.3 Page 3
If a dive is started within adaptation time
(after a change of altitude), the adaptation
time is displayed instead of the surface
interval.
Further possible information about the dive:
Too fast ascent* (page 1).
STOP DECO Ignored decompression
stop* (page 1).
24
Dive time
Date of the dive
O mix
2
Repetitive dive number
Start time CNS after the dive
Surface interval
Diving in SOS mode (gauge mode) (page 3).
Altitude class (page 2).
DESAT Desaturation was reset before the
dive (in USER menu) (page 1, 2).
Battery quality factor has been 3 bars or
less during the dive (page 1, 2, 3).
AVG Average depth (gauge mode) (page 3).
No-dive warning after the dive (page 1).
*Alarms during the dive.
Pushing the right button gets you back
to the dive list (first level screen within
logbook). From here you can advance to
the next dive of interest by pushing the
right button, and then a press-and-hold
of the right button lets you retrieve more
information about that dive, etc.
4.2.2.4 Statistical information
(HISTORY)
The history page is located between the
last and first log in the round-robin list of
dives.
Deepest dive Number of dives
Leaving the logbook
By pushing-and-holding the left button you
can exit the logbook. The logbook will also
close automatically after 3 minutes without
operation.
Longest dive
ALADIN ONE USER MANUAL