Safety; Electrical Connection - Kinetec Maestra Manual

Safety

The physician defines the protocol and ensures that it is correctly implemented (adjustments, session duration and
frequency of use).
The patient must know the start/stop/reverse function on the control handle. Hand control must be accessible to patient
at all times. (See page 7).
KINETEC Maestra complies with Directive 93/42/CEE.
KINETEC Maestra is not designed for use in the presence of flammable anaesthetics.
In case of electromagnetic interference with other devices move the device.
KINETEC Maestra is in compliance with standards in force (IEC 601.1.2), electromagnetic compatibility standard for
medical devices.
Please, do not touch the moving parts while the unit is running, pinching risk.

Electrical Connection

KINETEC Maestra is a type B class I device.
Before connecting the device to the power supply, check that the mains voltage matches that shown on the identification
plate (100-240 V~ 50-60Hz).
Connect the hand control (1)
Connect the power supply cable (2).
IMPORTANT
Check that the electrical socket is in good condition and is
suitable for the splint power supply cord. The latter complies with
current standards and has a grounding socket.
The plug may be connected to any standard socket.
The socket must however have a grounded pin.
To connect the power supply, only use the original cable supplied
with the machine.
Check that the cables remain free around the device so that they
do not get damaged.
Starting the unit
Switch on (3).
While the unit begins an auto diagnostic, the display shows the following
KINETEC
Maestra V01.0
Your KINETEC Maestra is ready to be used.
GB
4
EXPLOSION HAZARD:
Please wait
1
3
2
KINETEC
Maestra V01.0