First Degree Fitness PREDATOR E620ST User Manual page 8

Assembly
REQUIRED
 2xM8x15mm [6]
 2xM8 Washers
[8]
 6mm Allen Key
[11]
Torque: 180Kgf.cm
REQUIRED
 1 x Left Handle
Kit [3], includes
1xM15 Washer &
1xM8x15mm
Bolt
 1 x Right Handle
Kit [4], includes
1xM15 Washer &
1xM8x15mm
Bolt
 6mm Allen Key
[11]
 Multi-tool [12]
SECURE UPPER AND LOWER FRAME
a) Secure either side of bracket using the 2xM8x15mm [6] and
M8 Washers [8], tightening with the 6mm Allen Key [11].
M8 Washer
M8x15 Bolt
ATTACH RIGHT AND LEFT HANDLES TO CRANK SHAFT
a) Identify the right and left handle shafts. There is a 'R' or 'L'
marked on each handle shaft. NOTE: Improper installation will
result in uneven handle adjustment.
b) Use the 6mm Allen Key to disassemble the M8x15mm Bolt
and M15 Washer on each handle
M8x15 Bolt
M15 Washer
8
M8 Washer
M8x15 Bolt