Configuring the Scheduler
Default Settings for the Scheduler
Table 16: Default Command Scheduler Parameters
Parameters
Scheduler state
Log file size
Configuring the Scheduler
Enabling the Scheduler
Procedure
Step 1
Step 2
Step 3
Step 4
Example
This example shows how to enable the scheduler:
switch# configure terminal
switch(config)# feature scheduler
switch(config)# show scheduler config
config terminal
feature scheduler
scheduler logfile size 16
end
switch(config)#
Command or Action
switch# configure terminal
switch(config) # feature scheduler
(Optional) switch(config) # show scheduler
config
(Optional) switch(config)# copy
running-config startup-config
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
Default Settings for the Scheduler
Default
Disabled
16 KB
Purpose
Enters global configuration mode.
Enables the scheduler.
Displays the scheduler configuration.
Saves the change persistently through reboots
and restarts by copying the running
configuration to the startup configuration.
81